HFJ56 Integrated DTH Drilling Rig
- Drilling Diameter: 90-150mm
- Drilling Depth:50m
- Engine Power:194kW
- Rotary Torque:4200N.m
product Introduction
HFJ56 integrated down-the-hole drilling rig is a product that can bring you higher automation and higher drilling efficiency, reliable operation and simple operation. The integrated design of HF056 drilling rig and air compressor solves the traditional problems of mine air compressor movement and long-distance management, as well as compressed air consumption and excessive manpower. Equipped with a high-performance hydraulic dust removal system to meet the new environmental protection requirements of mines, it is a reliable solution for modern green mining.
Application
TECHNICAL DATA
Body specifications | Total mass | 10000kg |
full length | 7863mm | |
Full width | 2400mm | |
Full height | 3080mm | |
Bottom plate | Crawler bandwidth | 300mm |
Ground clearance | 370mm | |
Swing angle of crawler frame | ±10° | |
Walking speed | 2(Low speed)3(high speed)Km/h | |
Gradeability | 27° | |
Engine | Model number | QSC8.3-C260-30 |
Form | Water-cooled 6-cylinder EFI diesel engine | |
rated power | 194Kw/2100RPM | |
Fuel tank capacity | 400L | |
Air compressor | model | atlas copco |
pressure | 17(high pressure)bar | |
Output flow MAX | 17m3/min | |
Rotary motor | Swing speed | 0-90rpm |
Torque MAX | 4200Nm | |
Propulsion method | Motor driven planetary gearbox + sprocket chain type | |
Propulsion | 12KN | |
Lifting power | 21KN | |
Advance itinerary | 4148mm | |
Advance compensation | 1200mm | |
Hole depth | Drilling diameter | Φ90-Φ150mm |
Drilling depth | 50m | |
Drill rod length | 3m | |
Drill pipe diameter | 76mm | |
Dust collector | Hydraulic dry dust removal (optional wet) |