HFXP-50 Crawler Jet Grouting Grilling Rig
- Drilling Diameter: 50m
- Drilling Depth:3000N.m
- Engine Power:1km/h
- Weight:2800 kg
product Introduction
Single drill pipe spray method, integrated front end with three wings a bit or add one word bit drilling Ф 42 or Ф 50 drill pipe;Suitable for high speed drilling of soil layer, sand layer and other strata.
Rotary jet anchor cable construction method, equipped with 65 lock bolt propeller and anchor cable drill pipe, suitable for anchor cable reinforcement.
Single pipe, double pipe, three pipe rotary jet, swing jet, fixed jet and other work methods.
Features
- 1Full hydraulic control, easy and flexible operation, crawler chassis loading, easy and quick walking and moving to position, long travel of power head, reducing auxiliary time.
- 2Direct-acting load feedback fine-tuning variable hydraulic system, with power varying with load, high efficiency and low energy consumption.
- 3The rotary adopts a special valve with friction positioning, whose characteristics fully meet the requirements of rotary jet process.
- 4The power head variable speed range is wide, can meet the requirements of various strata and different drilling technology.
- 5Equipped with slewing support, the hole can be turned to the side of the track when needed.
- 6 Compact structure, centralized operation, convenient and safe.
- 7Display device for vertical drilling tower, power head rotation and lifting speed.
Application
Applicable to the railways, highways, Bridges, dam foundation, and various industrial and civil building foundation treatment and reinforcement of jet grouting construction;Anchoring engineering of foundation pit support;Equipped with air compressor and pneumatic hammer, it can be used for following pipe drilling, general rotary jet (swing jet, fixed jet) engineering construction, but also for shallow hole drilling and engineering survey drilling and other engineering construction.
TECHNICAL DATA
| Drill hole depth |
50m |
| Drill pipe diameter |
φ42mm φ50mm φ73mm |
| Borehole inclination |
± 3° forward tilting 10° backward tilting 90° |
| Maximum torque |
3000N/m |
| speed |
1.km/h |
| Climbing ability |
30° |
| Power head speed |
High: 0-148r /min low: 0-48r /min |
| Rated lift of power head |
30kN |
| The power head is allowed to apply pressure |
12kN |
| Head lift/pressure rate |
Fine adjustment speed of rotary jet is 0.06 ~ 0.9/1.8 m/min |
| Quick lift of power head |
0～22/0～28 m/min |
| Power head travel |
3500mm |
| External dimensions (when working) |
2600×1800×4600 |
| External dimensions (when transported) |
1780×1800×4600 |
| The whole machine quality |
2800 kg |
